Nickel Ball Valve is made up of nickel alloys. There are different types of nickel alloys and Suraj Metal Corporationis a manufacturer and supplier of the different types of nickel based valves. There are also the Nickel Plated Brass Ball Valve types which are not made up of entire nickel alloys but are plated with nickel. There are non – return valves that are used in unidirectional flow systems.
The Nickel 200 NRV Valve is made up of a commercially pure nickel grade. It is very much corrosion resistant and strong with particular resistance against acids and oxidizing agents. The Ni 200 Butterfly Valve and other types are used in chemical and acidic processing applications. The corrosion resistance of the valves such as the Nickel 200 UNS N02200 Swing Check Valve makes them applicable in food production systems as well. These are expensive as commercially pure nickel is expensive than the ordinary stainless steel grades. But the use of Nickel UNS N02200 Needle Valve and other types reduce the corrosion and damage to the systems greatly. So the different types of valves such as the Nickel N02200 Check Valve are used in sensitive systems and applications despite the cost. Please feel free to contact us for more information on the different types such as the Nickel 200 N02200 Gate and Globe Valve and others with the prices.
| Standards | API 600/BS1414, API 598/BS EN 12266-1, ASME B 16.10, ASME B 16.5, ASME B 16.25, ASME B 16.34 |
|---|---|
| Size | 1/8 to 16 Inch |
| Rating | Class 150#, 300#, 600#, 800#, 1500# |
| End Connection | Screwed [NPT], Socket Weld, Flanged End, Screwed Parallel, Screwed Taper |
| Grade | Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),Nickel 205 (UNS N02205) |
| Standard | Nickel 200 | Nickel 201 |
| UNS | N02200 | N02201 |
| WERKSTOFF NR. | 2.4066 | 2.4068 |
| AFNOR | N-100M | - |
| JIS | NW 2200 | NW 2201 |
| GOST | НП-2 | НП-2 |
| BS | NA 11 | NA 12 |
| EN | Ni 99.2 | LC-Ni 99 |
| C | Cb | Cr | Cu | Mn | Mo | Ni | P | S | Si | Ta |
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | 8 Times | MAX | MAX | MAX | MAX | 8 Times | ||||
| 0.07 | Carbon-1.00 | 19.0-21.0 | 3.0-4.0 | 2.0 | 2.0-3.0 | 32.0-38.0 | 0.045 | 0.035 | 1.0 | Carbon-1.00 |
| FORGING SPECIFICATION | COMMON DESIGNATION | MATERIAL SUFFIX | WROUGHT BAR SPECIFICATION | COMMON API TRIM # FOR BASE MATERIAL | |
|---|---|---|---|---|---|
| 150 TO 600 # | 900 TO 2500 # | ||||
| ASTM B462 N08367 | 19% Chrome; 28% Nickel; Cu-Mo; 0.07% C Super Stainless Steel | ASTM A351 Grade CN7M (A20) | ASTM B473 N08020 | 13 | 14 |
| ASTM B462 N08020 | 19% Chrome; 28% Nickel; Cu-Mo; 0.03% C Super Stainless Steel | ASTM A351 Grade CN3MN | ASTM B473 N08020 | 13 | 14 |
| ASTM B564 N04400 | 67% Ni; 30% Cu, Monel | ASTM A494 Grade M-35-1 (Monel) | ASTM B164 N04400 | 9, 11 | 9, 11 |
| 3½% Nickel Steel |
ASTM A352 Grade LC3 |
Low temperature applications to -150°F (-101°C). Not for use above +650°F (+340°C). |
| Monel | ASTM 743 Grade M3-35-1 |
Weldable grade. Good resistance to corrosion by all common organic acids and salt water. Also highly resistant to most alkaline solutions to +750°F (+400°C). |
| Hastelloy B | ASTM A743 Grade N-12M |
Is well suited for handling hydrofluoric acid at all concentrations and temperatures. Good resistance to sulphuric and phosphoric acids to +1200°F (+649°C). |
| Hastelloy C | ASTM A743 Grade CW-12M |
Good resistance to span oxidation conditions. Good properties at high temperatures. Good resistance to sulphuric and phosphoric acids to +1200°F (+649°C). |
| Inconel | ASTM A743 Grade CY-40 |
Very good for high temperature service. Good resistance to spanly corrosive media and atmosphere to +800°F (+425°C). |
